GF27.60-P-5100-04SK Floor Shift, Function

GF27.60-P-5100-04SK Floor shift, function
- Transmission 722.6


The selector lever is moved and positioned in the shift gate, which is not visible to the driver. All selector lever positions are detected by the electronic selector lever module control unit (N15/5), coded and transmitted via the Controller Area Network-bus class C (engine compartment) (CAN-C) to the ETC [EGS] control unit (N15/3).

In parallel to sending via CAN the selector lever positions "P", "R", "N "and "D" are passed on mechanically to the range selector lever on the transmission side by means of a shift rod.

The shift ranges "1", "2", "3" and "4", up to those which the electronic transmission control permits the upshifting of the automatic transmission, can be shifted via a sideways movement of the selector lever into selector lever position "D" (touch shift).