AR27.50-P-0601-01A Remove Grooved Ball Bearing In Rear Transmission Housing
AR27.50-P-0601-01A Remove Grooved Ball Bearing in Rear Transmission Housing
001 589 50 33 00
Puller
140 589 06 34 00
Chuck
1 Remove retaining ring of grooved ball bearing with pliers.
2 Screw collet into puller and tighten.
3 Attach puller over the bearing inner race.
4 The collet is tightened (picture A) by turning the puller upper part counterclockwise (arrow).
5 Using pulling device, pull grooved ball bearing out of transmission housing (picture B).