AR27.50-P-0620-02W Output Flange Removal and Installation
AR27.50-P-0620-02W Output Flange Removal and Installation
126 589 02 09 00
Socket wrench bit
129 589 01 07 00
Pin wrench
000 589 88 33 00
Two-legged puller
Remove output flange
1 Counter-hold output flange (1) with pin wrench (07).
2 Unscrew twelve-point nut (2) from output shaft (3) using socket wrench bit (3).
3 Remove output flange (1).
If output flange (1) is firmly attached use two-arm puller (08).
Install output flange
4 Push output flange (1) onto output shaft (3).
5 Counterhold output flange (1) using pin wrench (07) and tighten twelve-point nut (2) using socket wrench bit.
Replace twelve-point nut (2).
6 Secure twelve-point nut (2) in duplicate; to do this, hammer collar into the two grooves (arrow) of the output shaft (3) using a drift punch.