AR35.31-P-0550-27T Inserting Left Locking Ring

AR35.31-P-0550-27T Inserting left locking ring
- Rear axle center assembly dia. 198 [models 171.456, 211.056/256 up to 31.5.06, 211.065/082/087]

Component Identification:

1 Insert the circlip (29) marked during removal with pliers (064) in the groove so that the oil bore is not covered (arrow).

Install the circlip (29) which was previously removed and marked in order to achieve a basic preload of the rear axle housing.

2 Check that locking ring (29) is correctly seated.