AR35.31-P-0520-06V Drain Oil From Rear Axle Center Section

AR35.31-P-0520-06V Drain oil from rear axle center section

Rear Axle Center Assembly Housing:

Repair Materials:

Component Identification:

1 Clean area around oil drain screw (50h).
2 Undo oil drain screw (50h)

Installation: Replace oil drain screw (50h).

Component Identification:

3 Clean the new oil drain screw (50h) and the tapped hole in the rear axle center assembly using Loctite 7063 cleaning spray.

The oil drain screw (50g) and tapped hole must be free of oil and grease.

4 Apply about one droplet of Omnifit 100H sealing compound on the second or third lower thread.
5 Turn oil drain screw (50h) immediately into rear axle center assembly and tighten.