GF82.30-P-3004SK Windshield Wiper, Function

GF82.30-P-3004SK Windshield Wiper, Function

Component Identification:

Function prerequisites:
^ Circuit 15R ON

Function
The driver-side SAM control unit with fuse and relay module (N10/1) is notified of requests from the combination switch (S4) via the steering column module (N80).
The driver-side SAM control unit with fuse and relay module (N10/1) actuates the wiper motor (M6/1) in accordance with the requests.

^ For continuous wiping at slow speed (stage 1, approx. 40 cycles per min.), turn combination switch (S4) to position "II".
^ For continuous wiping at fast speed (stage 2, approx. 60 cycles per min.), turn combination switch (S4) to position "III".
^ For touch wiping, briefly push combination switch (S4) to detent point.

By briefly pressing the combination switch (S4), a single wipe is performed, when pressing for longer the wiping continues in accordance with the duration that the switch is actuated. Touch wiping takes place independently of the wiper level that has been selected.