AH42.10-P-0003-01GZ Notes on Installing Brake Pad Wear Sensor Contact Sensors

AH42.10-P-0003-01GZ Notes on installing brake pad wear sensor contact sensors

Component Identification:

^ When replacing the brake pads the left front brake pad contact sensor (S10/1), the right front brake pad contact sensor (S10/2) and the right rear brake pad contact sensor (S10/4) must also be replaced.
^ The left front brake pad contact sensor (S10/1), the right front brake pad contact sensor (S10/2) and right rear brake pad contact sensor (S10/4) may only be mounted on the inner brake pads.
^ The electrical feed line of the contact sensors must be routed as shown in the picture.
^ Check the correct latching of the left front brake pad contact sensor connector (S10/1x1), right front brake pad contact sensor connector (S10/2x1) and right rear brake pad contact sensor connector (S10/41).

Engrossing moisture can result in the warning lamp lighting up.