P1875

CAN communication with other control units installed in this vehicle is not possible.
Operation number of operation texts and work units or standard texts and flat rates:27-0641Start test sequence.1. Erase fault memory.2. Perform a road test and switch the ignition off and on several times with the vehicle stationary.Continue check procedure.1. Once again read fault memory.Continue with button "F2"

REQUIREMENT

- The test drive recommended for this vehicle was performed.
Question:Is fault code P1875 present?

YES
Fault code 'P1875' presentPress button F2 for further tests

No further information available.


NO
Fault code 'P1875' not presentNo additional tests are necessary.End of test