AH42.10-P-0003-01RT Note on Installing Contact Sensor For Brake Lining Wear Indicator

AH42.10-P-0003-01RT Note on installing contact sensor for brake lining wear indicator

Component Identification:

^ When replacing the brake pads the left front brake pad contact sensor (S10/1), the right front brake pad contact sensor (S10/2) and right rear brake pad contact sensor (S10/4) must also be replaced.
^ The left front brake pad contact sensor (S10/1), the right front brake pad contact sensor (S10/2) and right rear brake pad contact sensor (S10/4) may only be mounted on the inner brake pads.
^ The electrical feed line of the contact sensors must only be routed as shown in the picture.
^ Check the correct latching of the connector for the left front brake pad contact sensor (S10/1x1), right front connector for the right front brake pad contact sensor (S10/2x1) and connector for the right rear brake pad contact sensor (S10/4x1).

Ingressing moisture can lead to the lighting up of the warning lamp in the instrument cluster.