Timing Chain: Service and Repair

1. Remove front engine cover.

Fig. 8 Timing Chain Alignment:

2. Rotate crankshaft until No. 1 piston is at Top Dead Center (TDC) and timing marks are aligned.
3. Remove camshaft sprocket retaining bolt and washer.
4. Inspect timing chain deflection for excessive wear.
5. Slide sprockets and timing chain forward and remove as an assembly.
6. Reverse procedure to install, noting the following:

Fig. 9 Timing Chain Installation:

a. Slide timing chain and sprockets on with timing marks aligned.

CAUTION: The camshaft bolt is a special oil transferring part. Do not replace with a standard bolt.