Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1993 >> Sable V6-182 3.0L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL

1. Remove distributor cap and position it and attached wires aside so as not to interfere with work area.
2. Remove ICM harness connector.
3. Remove distributor from engine.
4. Remove ICM module attachment screws.
5. Pull RH side of module down distributor mounting flange and back up to disengage module terminals from connector in distributor base. The module may be pulled toward flange and away from distributor.

INSTALLATION

1. Apply a 1/32 inch coating of silicone grease to metal base of module. Position module on distributor mounting flange.
2. Carefully position module toward distributor bowl and securely engage the 3 distributor connector pins.
3. Install 2 module attaching screws and torque to 15-35 in. lb. (1.7-4.0 N-m). Install distributor
pro multis · About Operation CHARM