Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1994 >> Villager V6-181 3.0L SOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL

The antilock brake control module is located behind the instrument panel lower center panel.

1. Disconnect the battery ground cable.

2. Remove the storage bin.

3. Remove the RH instrument panel lower cover and LH instrument panel lower cover.

4. Disconnect the foot lamp electrical connectors, if equipped.






5. Disconnect the antilock brake control module electrical harness connector. Use a screwdriver to pry back the metal retainer and remove the harness connector.

6. Disconnect the surrounding antilock brake control module electrical harness connectors and move the harnesses out of the way.






7. Remove three antilock brake control module screws from the module bracket.


CAUTION: Electronic modules are sensitive to static electrical charges. If the module is exposed to these charges, damage may result.






8. Remove the antilock brake control module.

INSTALLATION

CAUTION: Electronic modules are sensitive to static electrical charges. If the module is exposed to these charges, damage may result.

1. Position the antilock brake control module in the vehicle.






2. Install the three antilock brake control module screws in the module bracket.

3. Connect the surrounding antilock brake control module electrical harness connectors.

4. Connect the antilock brake control module electrical harness connector.

5. Connect the foot lamp electrical connectors, if equipped.

6. Install the RH instrument panel lower cover and LH instrument panel lower cover.

7. Install the storage bin.

8. Connect the battery ground cable.
pro multis · About Operation CHARM