Return

REMOVAL
1. Place a drain pan under the steering gear.





2. Loosen the power steering return hose clamp at the steering gear.
3. Remove the power steering return hose from the steering gear and place the power steering return hose up and out of the way.





4. Remove the power steering return hose bracket bolt.
5. Disassemble the power steering return hose bracket and separate the power steering return hose and the power steering pressure hose.





6. Loosen the power steering return hose-to-intermediate line C clamp.
7. Remove the intermediate line C from the power steering return hose.
8. Remove the power steering return hose from the bottom of the vehicle.

INSTALLATION
1. To install, reverse the REMOVAL procedure.
^ Tighten the power steering return hose bracket bolt to 3-4 Nm (18-26 inch lbs.).

NOTE: Follow the start-up procedure. Start Up Procedure After Power Steering Pump or Gear Service