A1 Check Power to Anti-Lock Brake Control Module
- Disconnect anti-lock brake wiring plug from anti-lock brake control module.
- Connect EEC-IV Breakout Box 014-00322 with Anti-Lock Test Adapter T90P-50-ALA or equivalent to the anti-lock brake wiring plug wiring harness.
- Set multi-meter to read volts DC.
- Turn ignition switch to RUN.
- Measure voltage between breakout box pins 53 and 60.
- Is there a minimum of 10 volts?
YES -- Go to A4. A4 Check Ground
NO -- Go to A2. A2 Check ABS Control Module to Ground Wire