Inspection and Verification

Inspection and Verification

1. Verify the customer's original concern by operating the switches to duplicate the condition.
- In RUN without the engine running.
- In START before the ignition switch is released.
- In RUN with the engine running.

2. Inspect to determine if any of the following mechanical or electrical concerns apply:

Mechanical
- Damaged switch.
- Low fluid level (washer system).

Electrical
- Fuses.
- Circuit wiring.
- Switches or sending units.

3. If a concern remains after the inspection, determine the symptoms and go to the Symptom Chart. Symptom Chart