Air Flow Meter/Sensor: Service and Repair

REMOVAL

Mass Air Flow Sensor:

1. Disconnect the Mass Air Flow (MAF) electrical connector.
2. Remove the air duct from the MAF sensor housing.
3. Unclamp the upper air cleaner cover and remove the upper air cleaner cover with the MAF sensor assembly attached.





4. Remove the MAF sensor assembly nuts, and remove the MAF sensor assembly from the upper air cleaner cover.





5. Remove the two MAF sensor screws, and then remove the MAF sensor from the MAF sensor housing.





6. Inspect the MAF sensor housing screen for holes. If torn, replace the housing.

INSTALLATION

To install, reverse the removal procedure.
- Tighten the MAF sensor screws to: 8-10 Nm. (71-88 lb.in)