Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1996 >> Villager V6-181 3.0L SOHC >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Starter Motor: Service and Repair

REMOVAL AND INSTALLATION
1. Disconnect battery ground cable.
2. Remove air intake system.
3. Slide solenoid B terminal protective boot rearward and remove battery cable to B terminal attaching nut.
4. Remove brush cable to M terminal attaching nut.
5. Disconnect S terminal connector from ignition wire.
6. Remove starter motor attaching bolts, then remove.
7. Reverse procedure to install, noting the following:
a. Torque B and M terminal nut to 87-104 inch lbs.
b. Torque starter motor attaching bolts to 17-19 ft. lbs.







pro multis · About Operation CHARM