Camshaft, Engine

GENERAL SPECIFICATIONS
Lobe Lift
Intake 6.23 mm (0.245 inch)
Exhaust 6.23 mm (0.245 inch)
Allowable Lobe Lift Loss 0.127 mm (0.005 inch)
Theoretical Valve Maximum Lift
Intake 10.28 mm (0.405 inch)
Exhaust 10.28 mm (0.405 inch)
End Play 0.02-0.20 mm (0.0008-0.0078 inch)
Service Limit 0.20 mm (0.0078 inch)
Journal to Cylinder Head Bearing
Surface Clearance 0.03335-0.0835 mm (1.8007-1.8017 inch)
Journal Diameter Standard 45.7375-45.7625 mm (1.8007-1.8017 inch)
Runout Limit 0.127 mm (0.005 inch) (Runout of center bearings relative to bearing Nos. 1 and 5)
Out-of-Round Limit 0.08 mm (0.003 inch)
Camshaft Drive Assembled Gear Face Runout
Crankshaft 0.65 mm (0.026 inch)
Camshaft 0.275 mm (0.011 inch)