System Specifications
| Main Bearing Bore Diameter | 68.998 - 69.022 Millimeter (mm) | |
| Cylinder Bore Diameter | Grade 1: | 82.4 - 82.410 Millimeter (mm) |
| Grade 2: | 82.411 - 82.421 Millimeter (mm) | |
| Grade 3: | 82.420 - 82.430 Millimeter (mm) | |
| Surface Finish (RMS) | 0.2 - 0.6 Micron (micron) | |
| Out-Of-Round Limit | 0.015 Millimeter (mm) | |
| Out-Of-Round Service Limit | 0.020 Millimeter (mm) | |
| Taper Service Limit | 0.006 Millimeter (mm) | |
| Engine Bulkhead Housing To Cylinder Block | Refer to Procedure | |
| Engine Lifting Eyes Bolt And Stud | 83 Foot Pound-Force (ft.lb) |