Flex Fuel

REMOVAL
1. Remove the ignition coil from the bracket.







2. Disconnect the secondary air injection diverter valve.
^ Disconnect the vacuum tube.
^ Disconnect the secondary air injection diverter tube.







3. Separate the engine control sensor wire harness locators from the ignition coil bracket.







4. Position the secondary air injection diverter valve control solenoid aside.
^ Release the tab.







5. Position the secondary air injection diverter valve aside.
^ Remove the two nuts.







6. Remove the ignition coil mounting bracket.
^ Remove the stud bolts.

INSTALLATION
1. To install, reverse the removal procedure.