Column Shift

Removal
1. Remove the key release lever.
2. Remove the ignition switch lock cylinder.
3. Remove the screws and the lower instrument panel covering.
4. Remove the upper and the lower steering column shrouds.
5. Remove the steering column opening weather seal, the transaxle range selector lever pin and the transaxle range selector lever.
6. Remove the transaxle range selector lever clip.

Installation
1. Install the transaxle range selector lever clip.
2. Position the steering column opening weather seal on the transaxle range selector lever.
3. Install the selector lever.
4. Install the selector lever pin. Tap the selector lever pin until the head seats against the transmission column shift selector tube and the Tinnerman nut is visible on the bottom of the tube.
5. Install the steering column opening weather seal.
6. Install the upper and the lower steering column shrouds.
7. Install the lower instrument panel cover and the screws.
8. Install the ignition switch lock cylinder.
9. Install the key release lever.