Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2000 >> Villager V6-201 3.3L SOHC VIN T SFI >> Repair and Diagnosis >> Accessories and Optional Equipment >> General Module >> Service and Repair >> Driver Seat Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver Seat Module

REMOVAL
1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damages may result.







2. Remove the outboard front bucket seat riser trim panel.
1 Remove the four pin-type connectors.
2 Remove the seat riser trim cover.







3. Remove the Driver Seat Module (DSM) bracket rear screw.







4. Remove the DSM bracket side screw.







5. Remove the DSM.
1 Disconnect the electrical connectors.
2 Remove the DSM.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to learn the strategy.
pro multis · About Operation CHARM