Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2000 >> Villager V6-201 3.3L SOHC VIN T SFI >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Service and Repair

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the speed control deactivator switch.
1 Disconnect the speed control deactivator switch electrical connector.
2 Loosen the locknut.
3 Unscrew the speed control deactivator switch.

INSTALLATION
1. To install, reverse the removal procedure.
^ Adjust the speed control deactivator switch, refer to Switch Adjustment-Deactivator

NOTE
^ When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn its strategy.
^ The speed control deactivator switch must be adjusted during installation.
pro multis · About Operation CHARM