Power Window Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.

NOTE: Driver door shown, passenger similar.







2. Remove the screw cover.







3. Separate the window regulator control switch from the door trim panel.
1 Remove the screw.
2 Separate the window regulator control switch from the door trim panel.







4. Remove the window regulator control switch.
1 Disconnect the electrical connectors.
2 Remove the window regulator control switch.







5. Remove the switch assembly from the switch plate.
1 Remove the screws.
2 Remove the switch assembly from the switch plate.

INSTALLATION
1. To install, reverse the removal procedure.