Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2007 >> Milan FWD L4-2.3L VIN Z >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Core >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Core: Service and Repair


EVAPORATOR CORE







Removal and Installation

NOTE:
- If an evaporator core leak is suspected, the evaporator core must be leak tested before it is removed from the vehicle. Component Tests and General Diagnostics
- Installation of a new receiver/drier cartridge is not required when repairing the air conditioning system except when there is physical evidence of system contamination from a failed A/C compressor or damage to the receiver/drier cartridge. Service and Repair

1. Remove the heater core and evaporator core housing. Housing Assembly HVAC
2. Detach the wire harness from the heater core and evaporator core housing.
3. Remove the 15 evaporator core cover screws.
4. Separate the 2 halves of the heater core and evaporator core housing.
5. Remove the dash panel seal.
6. Remove the evaporator core. Service and Repair
7. To install, reverse the removal procedure.
- Lubricate the refrigerant system with the correct amount of clean PAG oil. Refrigerant Oil
pro multis · About Operation CHARM