Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2007 >> Montego AWD V6-3.0L VIN 1 >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Fuel Delivery and Air Induction >> Fuel Pump Control Unit >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Pump Control Unit: Service and Repair

FUEL PUMP DRIVER MODULE (FPDM)







Removal and Installation

All vehicles
1. Disconnect the battery ground cable.

Five Hundred
2. Remove the rear seat cushion and the rear corner backrest.

Freestyle
3. Remove the C-pillar trim panel.

All vehicles
4. Disconnect the fuel pump driver module (FPDM) electrical connector.
5. Remove the 2 nuts and the FPDM.
- To install, tighten to 5 Nm (44 lb-in).

6. To install reverse the removal procedure.
pro multis · About Operation CHARM