Spark Plug: Service and Repair

SPARK PLUGS

Exploded View

LH Side:

RH Side:

Removal and Installation
1. Remove the ignition coil-on-plugs.

2. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.

NOTE: Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.

Remove the spark plugs.
- To install, tighten to 18 Nm (13 lb-ft).

3. Inspect the spark plugs.
4. To install, reverse the removal procedure.
- Adjust the spark plug gap as required.