Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2009 >> Milan AWD L4-2.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Acceleration/Deceleration Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Acceleration/Deceleration Sensor: Service and Repair




Stability Control Sensor Cluster













Removal and Installation

NOTE: When installing a new stability control sensor cluster, it must be calibrated to the ABS module. Follow the scan tool directions for the calibration procedures.

1. Remove the instrument panel lower center finish panel.

2. Disconnect the stability control sensor cluster electrical connector.

3. Remove the 2 stability control sensor cluster bracket bolts and the stability control sensor cluster.
- To install, tighten to 8 Nm (71 lb-in).

4. To install, reverse the removal procedure.
- Using the scan tool, calibrate the new stability control sensor cluster to the ABS module. Follow the scan tool directions for Interactive Vehicle Dynamics (IVD) Initialization.

pro multis · About Operation CHARM