Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2009 >> Milan AWD L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Intermediate Shaft Speed Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Intermediate Shaft Speed Sensor




Intermediate Shaft Speed Sensor





Intermediate Shaft Speed Sensor









Removal

1. Disconnect the intermediate shaft speed sensor electrical connector.





2. Remove the bolt and the intermediate shaft speed sensor.
- To install, tighten to 10 Nm (89 lb-in).

- Check the sensor bore.

- Check the O-ring seal for nicks or cuts and install a new O-ring if necessary.





Installation

1. NOTE: Apply a light coat of petroleum jelly to the O-ring seal before installation.

NOTE: Apply thread sealant to the bolt.

To install, reverse the removal procedure.

pro multis · About Operation CHARM