Timing Components: Specifications

Timing Chain Tensioner

Install the RH timing chain tensioner and tensioner arm.
1. Install the tensioner arm.
2. Position the tensioner.
3. Install the 2 bolts.
4. Tighten to 25 Nm (18 lb-ft).

Install the LH timing chain tensioner arm and the LH timing chain tensioner.
1. Install the tensioner arm.
2. Position the tensioner.
3. Install the 2 bolts.
- Tighten to 25 Nm (18 lb-ft).

Crankshaft Pulley

Install the bolt and washer. Using the Strap Wrench to hold the crankshaft pulley, tighten the bolt in 4 stages:
Stage 1: Tighten to 120 Nm (89 lb-ft).
Stage 2: Loosen one full turn.
Stage 3: Tighten to 50 Nm (37 lb-ft).
Stage 4: Tighten an additional 90 degrees.

Timing Cover

Position the engine front cover and install the 14 bolts and the 2 stud bolts.
Tighten in the sequence shown to 25 Nm (18 lb-ft).