Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 2009 >> Mountaineer RWD V6-4.0L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair




Ignition Switch

NOTE: Steering wheel removed for clarity.










Removal and Installation

NOTICE: Do not remove the ignition lock cylinder and the ignition switch at the same time or damage to the column may result.

1. Depower the Supplemental Restraint System (SRS). For additional information, refer to Air Bag Systems.

2. Remove the 2 screws and the steering column opening cover.

3. Remove the 3 screws and the upper and lower steering column shrouds.

4. Disconnect the ignition switch electrical connector.

5. Push the 2 locking tabs inward and remove the ignition switch.





6. To install, reverse the removal procedure.

7. Repower the SRS. For additional information, refer to Air Bag Systems.

pro multis · About Operation CHARM