Seat Backrest Cover - Third Row

Seat Backrest Cover - Third Row

Removal and Installation

1. Release the backrest trim cover lower J-strip, open the trim cover and release the inner J-clips.

2. Remove the head restraint(s).

3. NOTICE: Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat back foam.

Release the hook-and-loop strips, invert the backrest trim cover and remove the 3 rows of hog rings.

4. Remove the head restraint guides.
- For bench seats, remove 4 head restraint guides.

- For 50/50 seats, remove 2 head restraint guides.

5. Remove the backrest trim cover.
- Pull the strap through the trim cover.

6. To install, reverse the removal procedure.