Replacing Power Steering Intake Pipe

Replacing Power Steering Intake Pipe

Recycling
Observe country-specific waste disposal regulations.

Draw hydraulic fluid out of tank (do not reuse).

Remove and install ear clip.





Release clip from intake pipe (1) on supply tank and remove pipe.





Release clip holding pipe to steering pump and remove pipe.

Catch any oil in suitable container.





Remove low pressure banjo bolt (1) to gain access to high pressure banjo bolt (2).

Remove pipe from vehicle.
High pressure pipe to steering gear
M14 Banjo Bolt 34 Nm
Low pressure pipe to steering gear
M16 Banjo Bolt 40 Nm

Bleed power steering.