Front

Removing And Installing/Replacing Front ABS Pulse Generator

Remove road wheel.





Remove screw (1) and release ABS pulse generator from housing.

Release lead from bracket on spring strut (2).

Disconnect lead from clip on subframe (3).
Tightening torque:
- ABS sensor to steering knuckle Allen headed bolt 8 Nm





Release ABS generator lead from clip on chassis leg (1).

Release plug connection (2) from clip and disconnect.

Install Hint:
Make sure plug connection is properly engaged and rubber grommet is correctly seated.





Install Hint:
Clean pulse generator housing and apply lubricating grease.