Replacing Speed Sensor (Input) (AISIN)

24 35 565 - Replacing speed sensor (input) (AISIN)





Important!
After completion of work, check transmission fluid level .
Make a note of drained ATF quantity.
Required replenishment quantity approx. 4.5 liters.





Important!
Use only the approved automatic transmission fluid in this automatic transmission.
Otherwise the automatic transmission may incur extensive damage!
Do not drain fluid before the transmission has cooled down.





Necessary preliminary tasks:
- Remove hydraulic selector unit Service and Repair





Release screw (1).
Tightening torque: 24 11 19AZ .
Remove sensor (2).