Flywheel: Service and Repair

11 22 500 Removing And Installing Or Replacing Flywheel (N16)

Special tools required:







Necessary preliminary tasks:
- Remove transmission.
- Remove clutch.







Lock flywheel with special tool 11 9 590.







Flywheel for automatic transmission.
Release flywheel bolts (1).
Tightening torque: 11 22 1AZ.

Installation note:
Flywheel (1) is secured with an dowel pin.
Fit new flywheel screws.
Clean crankshaft thread for flywheel screws.







Flywheel for manual gearbox.
Flywheel with and without dual-mass: unscrew bolts (1).

Installation note:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.

Tightening torque: 11 22 2AZ.







Installation note:
Reluctor ring (1) is loose on crankshaft and is only held in place when the flywheel is fitted.
Dowel pin (2) for fixing reluctor ring/flywheel.







Assemble engine.