Required Operations

EMR-90-010 RECALL PROCEDURE SEQUENCE:

Flow chart which shows the general description of the REQUIRED OPERATIONS.

These "REQUIRED OPERATIONS" are as follows:

1. Clean the carburetor.

2. Test the Carburetor Feedback System. Replace the Oxygen Sensor and or the Jet Mixture Solenoid Valve as needed.

3. Remove the carburetor.

4. Install a Choke Shim.

5. Replace the Enrichment Solenoid Jet.

6. Remove and clean the Sub-EGR Valve.

7. Remove and clean the EGR Valve.

8. Reinstall the carburetor.

9. Install the Vacuum Control Valve and Vacuum Hose Assembly.

10. Affix the Service Label.