Label Installation

Figure 28:

Figure 29:

1. Remove all dirt from the old service label (Figure 28-Truck: Figure 29-Montero). Install the new service label over the old label on the underside of the hood.

Figure 30:

2. Write in the your 5-digit dealer code under the white flap on the Emission Recall Completed Label (Figure 30):

Carefully remove all dirt and oil from the area on the lower right side of the existing Service Label. Carefully remove the white paper from the backside of the flap. Press the now clear flap portion onto the label. Affix the Emission Recall Completed Label along the LOWER RIGHT side of the Service Label.