Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Non-Turbo
Oxygen (O2) Sensor Location:
REMOVAL 1.
Disconnect the harness terminal.
2.
Remove the sensor with a suitable socket or wrench.
Oxygen Sensor:
INSTALLATION: 1.
Apply a thin coating of anti-seize compound to the threads.
NOTE: Do Not contaminate the sensor tip with compound.
2.
Install the sensor and torque to 29-36 ft.lb.
3.
Apply a thin coating of dielectric compound to the connector.
4.
Connect harness terminal.
