Computers and Control Systems: Specifications

***UPDATED BY TSB #91-13-013

Accelerator cable free play
M/T 0.04 - 0.08 in. (1 - 2 mm)
A/T 0.12 - 0.20 in. (3 - 5 mm)

Firing order 1-2-3-4-5-6

Idle speed [1] 700 ± 100 RPM

Idle speed W/ AC ON [1]
M/T (in neutral) 900 RPM
A/T (in D range) 650 RPM

Idle mixture [2]

TIGHTENING TORQUE SPECIFICATIONS:

Accelerator cable adjustment bolts 4 ft.lbs. (5 Nm)
Drain plug 10 - 15 ft.lbs. (13 - 20 Nm)
Drain plug (ID"7")[3] 12 - 19 ft.lbs. (17 - 26 Nm)
Fuel filter line to fuel filter (eye bolt) 22 ft.lbs. (30 Nm)
Fuel pressure regulator installation bolts 7 ft.lbs. (9 Nm)
Fuel rail cross-over pipe installation bolts 7 - 9 ft.lbs. (10 - 13 Nm)
Fuel rail installation bolts 7 - 9 ft.lbs. (10 - 13 Nm)
High pressure hose to fuel filter 22 ft.lbs. (30 Nm)
High pressure hose to fuel rail 4 ft.lbs. (5 Nm)
High pressure hose to fuel pump 25 ft.lbs. (35 Nm)
Main pipe to fuel filter line 25 ft.lbs. (35 Nm)
Main pipe to high pressure hose 22 ft.lbs. (30 Nm)
Throttle body to surge tank bolts 7 - 9 ft.lbs. (10 - 13 Nm)
TPS mounting screws 1.5 ft.lbs. (2.0 Nm)

[1] Refer to ADJUSTMENT PROCEDURES.
[2] Not adjustable.
[3] Refer to COMPONENT REPLACEMENT AND REPAIR PROCEDURES under FUEL TANK for clarification.