System Specifications
***UPDATED BY TSB #91-13-013Accelerator cable free play
M/T 0.04 - 0.08 in. (1 - 2 mm)
A/T 0.12 - 0.20 in. (3 - 5 mm)
Firing order 1-3-4-2
Idle speed [1] 750 ± 100 RPM
Idle speed W/ AC ON [1]
M/T (in neutral) 900 RPM
A/T (in D range) 700 RPM
Idle mixture [2]
TIGHTENING TORQUE SPECIFICATIONS:
Accelerator cable adjustment nut 6 - 8 ft.lbs. (8 -11 Nm)
Drain plug 11 - 14 ft.lbs. (15 - 20 Nm)
Drain plug 10 - 15 ft.lbs. (13 - 20 Nm)
Drain plug (ID"7")[3] 12 - 19 ft.lbs. (17 - 26 Nm)
Fuel pressure regulator mounting bolt 5 - 8 ft.lbs. (7 - 11 Nm)
Fuel rail installation bolts 7.2 - 9.4 ft.lbs. (10 - 13 Nm)
High pressure hose to fuel filter 18 - 25 ft.lbs. (25 - 35 Nm)
High pressure hose to fuel rail 1.4 - 2.2 ft.lbs. (2 - 3 Nm)
High pressure hose to fuel tank 22 - 29 ft.lbs. (30 - 40 Nm)
Main fuel line to fuel filter 22 - 29 ft.lbs. (30 - 40 Nm)
Main fuel line to high pressure hose 22 - 29 ft.lbs. (30 - 40 Nm)
Throttle body to surge tank bolts 711 - 18 ft.lbs. (15 - 25 Nm)
TPS mounting screws 1.1 - 1.8 ft.lbs. (1.5 - 2.5 Nm)
[1] Refer to ADJUSTMENT PROCEDURES.
[2] Not adjustable.
[3] Refer to COMPONENT REPLACEMENT AND REPAIR PROCEDURES under FUEL TANK for clarification.