Powertrain Management: Tools and Equipment

Multi-use Tester, Installed:

PURPOSE
The Multi-Use Tester is a diagnostic read-out box--Scan tool--designed by Mitsubishi to;
- Read system performance information stored in various system controller memories.
- Display fault messages stored in the various system controller memories.
- Allow technicians to test computer-controlled vehicle systems through circuit actuation.
- Lead technicians through the diagnostic procedures when used in conjunction with this reference.


Note: There are scan tools available from other manufacturers which can be used on these vehicles.
However, the procedures outlined in this reference were designed specifically for use with the Multi-Use Tester diagnostic read-out box. It is assumed in the following procedures that the Multi-Use Tester is being used.

OPERATION
The Multi-Use Tester operates by communicating with the controller for the vehicle system being tested.
- To perform diagnostic tests, insert the appropriate program cartridge into the Multi-Use Tester and connect the power supply cable to the positive terminal of the battery, or the cigarette lighter.