Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 1994 >> Eclipse AWD L4-1997cc 2.0L DOHC Turbo >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Testing and Inspection

NOTE: An analog-type circuit tester should be used.

Ignition Power Transistor Check:




Ignition Power Transistor Check - Chart:




No. 1 - No. 4 coil side
1. Connect the negative (-) terminal of the 1.5 V power supply to terminal (3) of the ignition power transistor and then check whether there is continuity between terminal (8) and terminal (3) when terminal (7) and the positive (+) terminal are connected and disconnected.

NOTE: Connect the (-) probe of the circuit tester to terminal (13).

2. Replace the ignition power transistor if there is a malfunction.

Ignition Power Transistor Check:




Ignition Power Transistor Check - Chart:




No. 2 - No. 3 coil side
1. Connect the negative (-) terminal of the 1.5 V power supply to terminal (3) of the ignition power transistor; and then check whether there is continuity between terminal (1) and terminal (3) when terminal (2) and the positive (+) terminal are connected and disconnected.

NOTE: Connect the (-) probe of the circuit tester to terminal (12).

2. Replace the ignition power transistor if there is a malfunction.

pro multis · About Operation CHARM