Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Computer Connector

Foreword
A loose connector should be rectified by removing female terminal from connector housing and raising its lance to establish a more secure engagement.

Computer Connector:





1. Insert screwdriver [1.4 mm (0.06 in.) width] as shown in the figure disengage front holder and remove it.

Computer Connector:





2. Insert harness of terminal to be rectified deep into connector from harness side and hold it there.

Computer Connector:





3. Insert tip of screwdriver [1.4 mm (0.06 in.) width] into connector in a manner as shown in the figure. Raise housing lance slightly with it and pull out harness.

NOTE: Tool No.753787-1 supplied by AMP can be used instead of screwdriver.

Computer Connector:





4. Insert needle through a hole provided on terminal and raise contact point of male terminal