System Specifications

LUBRICANTS
Brake Fluid DOT 3 or DOT 4 Used For Clutch Fluid.

Rubber Grease Used For Push Rod Assembly & Boot.

MITSUBISHI Genuine Grease Part No. 0101011 or Equivalent Used For Release Cylinder Push Rod, Clutch & Flywheel Assembly Spline, Clutch Release Lever To Release Cylinder Contact Surface and Clutch Release Lever To Release Bearing Contact Surface.

Brake Grease SAE J310, NLGI No. 1 Used For Clutch Pedal Shaft, Bushings and End of The Pedal, Clutch Master Cylinder Push Rod, Clevis Pin and Washer and Clutch Release Cylinder Clevis Pin.