Cylinder Block Dimensions

SERVICE SPECIFICATIONS
Bore 86.5 mm (3.41 inch)
Stroke 100.0 mm (3.94 inch)
Piston Displacement 2,351 cm3 (143.4 cubic inch)
Compression Ratio 9.5
Bearing Cap Bolt Shank Length:
Maximum 71.1 mm (2.79 inch)
Piston To Cylinder Clearance 0.02 - 0.04 mm (0.0008 - 0.0015 inch)
Cylinder Block Flatness Of Gasket Surface:
Standard Value 0.05 mm (0.02 inch)
Limit 0.1 mm (0.03 inch)
Cylinder Block Grinding Limit Of Gasket Surface:
Total Resurfacing Depth Of Both Head And Block 0.2 mm (0.007 inch)
Cylinder Block Overall Height 290 mm (11.4 inch)
Cylinder Block Inside Diameter 86.5 mm (3.41 inch)
Cylindricity 0.01 mm (0.0003 inch)

TORQUE SPECIFICATIONS
Bearing Cap Bolt:
Step 1 25 Nm (18 ft. lbs.)
Step 2 90°
Step 3 100°
Rear Plate 11 Nm (95 inch lbs.)