General Specifications

SERVICE SPECIFICATIONS
Cylinder Head Bolt Length 99.4 mm (3.91 inch)
Cylinder Head Flatness A Gasket Surface:
Standard Value Less Than 0.05 mm (0.0020 inch)
Limit 0.2 mm (0.008 inch)
Cylinder Head Grinding Limit Of Gasket Surface:
Total Resurfacing Depth Of Both Head and Block 0.2 mm (0.008 inch)
Cylinder Head Overall Height 131.9 - 132.1 mm (5.193 - 5.201 inch)

TORQUE SPECIFICATIONS
Camshaft Bearing Cap Bolt 20 Nm (14 ft. lbs.)
Oil Delivery Body 11 Nm (8 ft. lbs.)
Cylinder Head Bolt:
Step 1 20 Nm (14.5 ft. lbs.)
Step 2 + 90°
Step 3 + 90°