Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 1999 >> Eclipse RS L4-1997cc 2.0L DOHC MFI >> Repair and Diagnosis >> Service and Repair >> Injector Connector
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Injector Connector

Foreword
A connector that engages loosely can be repaired by removing the female terminal from the connector housing and raising its lance to establish securer engagement. Removal of the connector terminal used for MFI and ELC-4 A/T control circuit can be done in the following manner.




1. Remove the waterproof cap.




2. Insert the tip of a screwdriver [1 .4 mm (0.06 in.) width] into the connector as shown in the figure, press in the terminal lance, and pull out the harness.
3. Press the contact point of the male terminal down by holding a screwdriver [1.4 mm (0.06 in.) width] as shown in the figure.

CAUTION: Make sure the lance is in the proper condition before the terminal is inserted into the connector.
pro multis · About Operation CHARM