Service Specifications

Steering Wheel Free Play
With Engine Running
Limit 30 mm (1.2 inch)
With Engine Stopped
Standard Value 10 mm (0.4 inch) or less

Steering Angle
Inside Wheel 33°06' ± 2°00'
Outside Wheel 28°30'

Tie Rod End Ball Jnt Breakaway Torque 0.5-2.5 Nm (4.4-22.1 inch lbs)

Tie Rod Swing Resistance 4-18.6 N (17.8-82.7 lbs)
Or 1.0-4.9 Nm (8.7-43.4 inch lbs)

Engine Idle Speed 700 ± 100 rpm

Stationary Steering Effort
Standard Value 30 N (6.7 lbs) or less
Fluctuation Allowance
Standard Value 5.9 N (1.33 lbs)

Oil Pump Pressure
Oil Pump Relief Pressure
Standard Value 8.3-9.5 MPa (1,209-1,280 psi)
Pressure Under No-Load Conditions
Standard Value 0.8-1.0 MPa (116-145 psi)
Steering Gear Retention Hydraulic Pressure
Standard Value 8.3-9.5 MPa (1,209-1,280 psi)

Oil Pressure Switch Operating Pressure
OFF --] ON
Standard Value 1.8-2.4 MPa (261-348 psi)
ON --] OFF
Standard Value 0.8-2.4 MPa (116-348 psi)

Gear Box Total Pinion Torque
Standard Value 0.8-1.9 Nm (6.9-16.5 inch lbs)
Change in Torque 0.7 Nm (6.1 inch lbs) or less

Opening Dimension of Special Tool MB991561
Standard Value 1.9 mm (0.07 inch)

Band Crimped Width
Standard Value 1.4-1.8 mm (0.06-0.07 inch)