Shift Interlock System

SHIFT LOCK MECHANISM CHECK





1. Check that the selector lever cannot be moved from the P position to any other position under the following conditions.
Ignition key position: ACC
Brake pedal: Released Button pressed
2. Check that the selector lever can be moved smoothly from the P position to other position under the following conditions.
Ignition key position: ACC
Brake pedal: Depressed Button pressed





3. Check that the selector lever can be moved smoothly from the R position to the P position under the following conditions.
Ignition key position: ACC
Brake pedal: Released Button pressed





4. If the above operations are defective, adjust the shift lock cable mechanism by the following procedure.
1. Remove the front console assembly.
2. Move the selector lever to the P position.
3. Loosen the nut clamping the shift lock cable.
4. Adjust the shift lock cable so that the end of the cable (red mark) comes between the lobe of the lock cam, and then tighten the nut to the specified torque to clamp the shift lock cable.
5. Install the front console assembly.